Media

Fire Doors Save Care Home Residents
The importance of fire doors is once again made clear with this incident, which could have turned out very differently had they ...
Read More
Bespoke Fire Doors – Do’s and Don’ts
Over 3m fire doors, most fabricated from timber, re installed in the UK every year and fire doorsets from BCS ...
Read More
Fire Doors – Essential Factors
As our name suggests, we create bespoke fire doors and bespoke fire doorsets to individual specifications, offering countless combinations of ...
Read More

Is it acceptable to put metal faces on fire doors?
Without specific fire test evidence the answer is no. In general, even face fixed kick plates and push plates must not exceed 30% of the door leaf area but you must always check the specific assessment for the permitted percentage that is allowed.
One leaf of a fire rated pair has been damaged, can we replace the damaged leaf only and still maintain the fire rating?
Unless you can obtain the replacement leaf from the same manufacturer who supplied the original pair it would be difficult to guarantee the fire certification. There are several cores on the market and without knowing which one has been used we would recommend both leaves should be replaced.
Why should I specify third party certification?
A third party accredited scheme such as the BM TRADA fire door scheme audits its member companies both by inspection and audit tests of products to ensure products are manufactured correctly and standards are met.
What is the maximum gap allowed to the bottom of fire doors?
Generally the maximum gap allowed between the bottom of fire doors and none combustible thresholds is 10mm, for fire and smoke control doors then the gap should be no greater than 3mm, however it is always advisable to check the specific assessment package for the doors that are been used.